180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (28.0 mm OD, 76.2 mm CLR) Flat Profile

180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (28.0 mm OD, 76.2 mm CLR) Flat ProfileSpecs Outside Diameter of the Tubing (OD): 28. 0 mm Minimum Wall Thickness (DOM): 0. 095" (2. 4 mm) Minimum Wall Thickness (4130): 0. 095" (2. 4 mm) Minimum Wall Thickness (ERW): 0. 109" (2. 8 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 3" (76. 2 mm) Maximum Degree of

36" length gives you enough torque to manually bend up to 2" OD

Centerline Radius: 4” (101

Other Specifications

Adjustable stop makes repeat bends accurate and easy

000 PSI electric/hydraulic pump

Maximum Ovality: <10%

Industrial Hole Saw Notcher

Includes: 2" Dimple Dies | Requires 2" Pilot Hole

standard 6 cubic inches of oil/minute on competing models)

Notch Angle: 0degrees-60degrees

This roll set will bend the flat stock up to 1-1/4" in width

Minimum Wall Thickness (4130): 0