VFC M249 Improved Standoff Nozzle Return Spring V2 Preorder

VFC M249 Improved Standoff Nozzle Return Spring V2 PreorderV2 has a thicker wire diameter than v1. This nozzle spring is designed to have the nozzle start slightly forward of the bolt carrier so that bbs are seated before the bolt carrier is fully forward. In practice this should allow bbs to enter the chamber and stabilize before being shot. This will improve precision. please note that the compression part of the spring should be connected to the nozzle pin while the tension part of the spring should be

-All hardware is included excluding bonding adhesive (JB Weld recommended)

Product Brand : Crusader

UNBREAKABLE WITH ABNORMAL USE

it creates a TDC like effect without having to drill through the upper receiver

This nozzle spring is designed to have the nozzle start slightly forward of the bolt carrier so that bbs are seated before the bolt carrier is fully forward

In practice this should allow bbs to enter the chamber and stabilize before being shot

MAKE SURE TO TAKE A LOOK AT BLACK VARIABLES M249 ADAPTERS: https://blackvariable

(helps to close receivers that previously needed to remove the pivot pin)

-4140 Steel

-Anodized 7075 aluminum handgaurd

NOT Compatible with VFC/Umarex MP5A5 V2 (3-round burst mode) GBB

This is a clone of the classic handgaurd for the DPMS Kitty Kat