Bondtech Raise3D Pro2 Hotends Fix x axis sensor

Bondtech Raise3D Pro2 Hotends Fix x axis sensorYour Raise3D Pro2 is failing on those big PLA prints you bought it for? We have the fix. The Raise3D Pro2 can actually be a very good 3D printer if you use this. Bondtech Hotend Fix for Raise3D Pro2 Advantages Affordable with a great value for cost; Heat creep is minimized by Copperheads thermal performance; Better layer bonding from the Bondtech CHT nozzles and higher flow with PLA and other non abrasive materials; Compatible with RepRap nozzles;

Maximum temperature: 300°C

but can be used with E3D V6

the power system under the same current can be reduced to the hot bed of 1/4

Low shrinkage rate

So the use of PEI superior thermal stability can be used to make high-temperature heat-resistant devices

More color & UV reactive

Because of the small fractures on the print surface

Allowed to self-design the interface of booting logo and all buttons

PVA-based glue

This allows allocating a dedicated driver per each motor for both Z axis and X axis

Replacement Stepper Driver for the N2 or N2 Plus

as wood particles in the filament may clog the nozzle