Castle Nut Driver for Suzuki Swing Arm Pliers

Castle Nut Driver for Suzuki Swing Arm PliersThis tool is primarily used to remove and replace the swinging arm pivot on the following popular Suzuki models: SV650, SV1000, DL650, DL1000, GSXR600, GSXR750, GSXR1000 It replaces Suzuki special tool 09940 14940 The internal diameter is 30mm and the external is 43. 2mm. It will likely fit other castle nuts on other bikes.

alkali and air resistant

with a bit of care

6 point wall drive sockets

Without the proper tool it's so easy to mark the stanchions

Bike It Jumbo Barrel Foot Pump

The set also contain two tap wrenchs

especially Öhlins

- Standard 6 point A/F sockets 3/16" - 7/8"

but it it provides 300 CCA (Cold Cranking Amps) against the stock batteries 200CCA

Features include:

Pozi 1 x 75mm

This tool is perfect for removing the castellated exhaust nuts from 70s Bevel or gear driven singles and twins