Sample Holder 15 mm x 15 mm Select nominal aperture::0.03 cm2 - 2 mm dia.

Sample Holder 15 mm x 15 mm Select nominal aperture::0.03 cm2 - 2 mm dia.The sample holder (also known as flat specimen holder) is used for holding flat, circular or square rectangular samples. It enables contacting the sample from the front (e. g. ITO FTO glass, Monolayer Graphene on SiC, or Boron Doped Diamond thin film on various substrates) and from the back (e. g. metal specimen, Glassy Carbon plate, Boron Doped Diamond plate). The nominal aperture is 0. 07cm2, but other value can be provided on request. The large

For stubborn deposits

Beaker Holder The beaker which contains the coating material (coating solution) will be placed into the slot of the beaker holder Solution container One 150ml beaker is included

and fill the gap between larger ITV2000s (which flow up to 1

This is one piece of high-temperature silicone rubber O rings for OD 25 or 50 mm quick flange sets

Insulating Layer:  SiO2

Electrolyte-Gated Organic Field Effect Transistor (EGOFET)

Size:          1" dia

for worldwide use

The infusion rate can be adjusted while pumping

1/4" in diameter vacuum sealing assembly will connect with 1/4" rubber hose

Package:  50 pcs per box

6 g/cm3 Standard Voltage Range 2