Sealey Digital Start/Stop Battery & Alternator Tester with Printer 6/12/24V BT2014

Sealey Digital Start/Stop Battery & Alternator Tester with Printer 6/12/24V BT2014Professional diagnosis of battery and alternator faults with the added facility to print the results. Test battery condition with as little as 1. 5V of residual charge. No heat, no sparks and no misdiagnosis. Checks condition of alternator, no complicated connections or interpretation required. Analyse the charging system at rest and under load to determine condition of the alternator. Suitable for use on motorcycles, cars (including start stop) and

Simple operation requires workshop air supply and does not require fiddly interchange of vacuum and fluid hoses - as found on other versions of this tool

Steel construction self-priming lever pump

Tailstock Chuck MT2

5PC 30mm Spline Bit: M5

Chock can be used freestanding or fixed to any hard surface (fixings not included)

Supplied with large high pressure gauge reading 0-145psi and 0-1000kPa and a small low pressure gauge for accurate low pressure readings

19mm x 21mm

clip remover

One punch and a die

Can be used in situ without removing the arm from the vehicle

Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration)

heavy-duty steel vice with anvil suitable for workshop