Kidde KI-RB4 06/02 NEXT

Kidde KI-RB4 06/02 NEXTThis base includes a relay. Normally Open or Normally Closed operation is selected during installation. The dry contact is rated for 1 amp (pilot duty) @30 Vdc. The relays position is supervised to avoid accidentally jarring it out of position. The KI RB can be operated as a control relay if programmed to do so at the control panel. The relay base does not support the GSA LED Remote LED.

also known as the Flex 402

Access to auxiliary power is via easily accessible terminal blocks located on the power supply monitor module

pages 6-7 for a typical T-4002 thermostat wallbox installation inside a masonry box

is fully monitored

Wide Detection Range: Detectable distances span 8 m to 100 m (≈ 26 ft to 328 ft)

Specification

276-R resistor kits permit field installation of the series resistor on applicable stations

The total point capacity is a maximum of 75 points per panel

CRF-300-6 (Six Relays)

The XP95A Multi-Criteria Detector (Smoke/Heat) uses new photoelectric sensing technology

Product Type: Alarm Control Panel Board

2-Wre horn/strobe Sync mode allows audible notification appliances (horns) and visual notification appliances (strobes) to be silenced/deactivated at the same time