SR20/KA24 High Performance Engine fan - 60% more air flow Engine Mounts

SR20/KA24 High Performance Engine fan - 60% more air flow Engine MountsOver 10,000 sold! This is probably the single best cooling mod you can do to your car! The GKTECH high performance engine fan has been designed and engineered in Australia by our in house team with the intention of pulling more air than the factory item. When tested on a dyno the GKTECH high performance fan took less than half the time to cool down from 90 degrees to operating temperature (good for next time you're on the start line at the track).

We still use

The OEM rubber bushes are prone to high loads

We also supply shims to keep it at OEM height should you so wish

35 hour whip test

45 mm THREAD SIZE THREAD SIZE 3/4 - 16 UNF LH 3/4 - 16 UNF LH ROD END HEAD DIAMETER ROD END HEAD DIAMETER 1

and the ackerman feels really good

- For race cars only however no permanent modifications are required

at their minimum length they start at +25mm over OEM and adjust out to +50mm from OEM

370lbs pull test

giving the driver a more direct

and then the braided line back to the rear brake line block in the engine bay

- Anodized black