ProAc DB1 Goldring Spares

ProAc DB1 Goldring Spares*These speakers are often built to order, so please anticipate supply in the region of 2 4 weeks, but if delivery time is critical please contact us first so we can check for any current manufacturing delays* The DB1 is a very impressive loudspeaker, it's a very clever design which is fairly compact yet is large enough to produce a big sound (naturally in small to medium sized rooms) and not suffer from the obvious dynamic compression that most

Internal Impedance: 6 Ω

The turntable can be upgraded with the Michell HR power supply

Output Voltage (Typically): 500mV / 1kHz(at 5mV / 1kHz)

drive system slip

Net Weight5

The stand height should be one that gets the tweeter (or midway between the tweeter and mid range) to be level with your seated ear level - this will depend upon your physical proportions and your seat of course

Effective Tonearm Length: 254 mm

Close to wall placement is required for the ported enclosure to get sufficient reinforcement at low frequencies

The development of Tuned / Super ARAY conductor geometries was driven by a desire to minimise high frequency noise

For this reason we have also included an option to purchase a set of Electro Harmonix EL84 valves for anyone that wants to buy them at the same time as the amplifier

The Copper Star is completely point to point hard wired

*Coming very soon